The type F-FST200 Forklift Slip-on Hook Jib has been designed as a simple Slip-on Jib attachment with 2 hook positions 585mm apart and a diameter 50 Tow Ball fitted at the front of the Jib.
Type:
F-FST200Products Code:
03.01.04.0011Surface Treatment:
Galvanizing or As RequestThe type F-FST200 Forklift Slip-on Hook Jib has been designed as a simple Slip-on Jib attachment with 2 hook positions 585mm apart and a diameter 50 Tow Ball fitted at the front of the Jib.
- Both hook positions have a WLL of 2000kg – refer diagram below. When using the Tow Bar, the Tow
weight is not to exceed 500kg and the minimum capacity of the Forklift is to be 2 Tonne.
- The Unit is supplied with 2 Fork Arm Retaining Toggle Pins to prevent the Jib from moving off the fork arm.
- The Standard Finish on the Type FST200 Forklift Slip-On Jib is Galvanized.
Specification
· Code: 03.01.04.0011
· Working Load Limit (WLL) 2000kg
· Maximum Towing Capacity 500kg
· Unit Weight 44kg
· Load Centre 1160mm
· Pocket Size（ab） 140 x 65mm
· Pocket Centres 250 mm
· Horizontal C of G 655mm
· Vertical C of G -30mm
· Dimension(LWH)/mm：1415×420×158
Previous :
Fixed Tilt Forklift Lifting Jib Extents to 2.36m Height 4700kg F-FJA470Next :
Forklift Jib Attachment 2500kg F-2FJ25If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Forklift Jib has been designed as a simple jib with 2 hook positions (each one with SWL 2500kg) 500mm apart.
Jib allows for additional lifting height with the extension beam being raised above the fork pockets.
The type F-FJL2.5 Fixed Long Jib has a 3.5 metre extension which allows for long reach lifts.
The type F-FJA350 3500kg Telescopic Extension Jib attachment is designed as an affordable general purpose Jib able to manoeuvre in confined spaces, with a 2.365 metre reach when fully extended.
This 4500kg short fixed Jib is designed as an afforable general purpose jib able to manoeuvre in confined spaces, with a 1.925 metre reach when fully extended.
This 4500kg long jib is a general purpose jib which is great for reaching across pits and areas where the forklift cant drive up to as it has a 3.5 metre reach when fully extended.
The type F-FJA470 4700kg Telescopic Extension Jib attachment is designed as an affordable general purpose Jib able to manoeuvre in confined spaces, with a 2.365 metre reach when fully extended.
The Jib has a 1.96 metre reach when fully extended, and an overall length of 1.3 metres when retracted.
12 Jiangshan Road, Longzhou Industrial Zone, Longyan, China
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
© Copyright: 2024 Longyan Ealita Machine Manufacture Co., Ltd All Rights Reserved.
IPv6 network supported
English
